Fences Finished

The Old Glory 28mm Russian Farmsteads I painted up for Gathering in the Desert came with some fences that I didn't finish in time. These are rather tall fences and will be of use for various era's. I'm thinking of coming up with a "firing step" to add along the inner side of the fence so 28mm figures can see over the top to shoot. As you can see by the test paint of the Warhammer Fantasy Tomb King archer below, the fences are a bit tall. And yes, Tomb Kings are my next major project.

GITD 2010 Terrain Progress Report 2: Rohan

Well, here are some pieces that will likely be on the Rohan table I'm doing for GITD 2010. The great thing about these pieces is they can work for a wide variety of settings...I'm sure some will end up on the table when doing 28mm ACW as well as 28mm WWII Eastern Front! So, here's what I have so far:

Fences by Pegasus Hobbies, but I repainted them to fit in with the rest of the terrain. The bridge is from JR Miniatures. The sheds (there are actually 2) are from Old Glory and they have lift off roofs. The watering troughs are also Old Glory. I'm not sure where the well is from; it is resin and I've had it for a long time and I finally had a reason to paint it up.

Here are 2 Old Glory houses. These come from their Russian building range. As you can see the roofs lift off. The doors are metal and the buildings are resin. I tried to get the doors so they could open, but they it was impossible for me to do so...the combination of the size & weight of the door, the place to drill for rare earth magnets or pins, and the relatively thin resin at the bottom of the door defeated my feable modeling skills. So the doors are glued in...deal with it!

Here's a closer picture of one of the houses.

And a closer picture of the second house.

And here's a barn from Old Glory. It is similar to the house, but with a staw roof. I have 2 of these as well because they came in a set along with the shed and some large log walls that I will be painting up after the tournament. This is a little shiney because I had just gotten done putting a coat of spray polyeurothane on it. It will be dulcoted once it dries for a nice flat look.

The last pieces of terrain I have to finish off for the Rohan table are some woods...I'll put some pictures up once I finish them off.

Pegasus Hobbies Terrain

OK, here's the last pictures of the Osgiliath terrain that I'm doing for the Gathering in the Desert Lord of the Rings tournament. This first piece is by Pegasus hobbies and came all ready finished. I mounted it on the display board, rubbled it, repainted the small roof sections, and gave it another dry brush to help it blend in with the rest of the pieces I'm doing for this project. Each of the corners in this building come with 2 removeable floors which are not in place for these pictures.

Now this Pegasus hobbies piece was is a plastic kit that had to be assembled and painted; this is the only plastic kit I'll be using...everything else is resin. I didn't want another building ruin with the center collapsed like the one above, so instead I decided to set this one up with 2 adjacent corners still standing and make it a longer piece.

Crusader29 Terrain

Here are some pieces I put together using resin Crusader29 terrain. This stuff started out as completed wall sections provided by Tim K (thanks Tim); Tim said he never thought he'd get around to using this stuff so he donated it to the Osgiliath project. I had to break apart the full wall sections and damage them some to get the look that I wanted. I also took modeling putty and filled in the inner facing of the walls; the outer facing has great detail, but the inner facing was recessed in the center and the edges were raised...this was due to how the molds were set up by the company. Using the modeling paste allowed me to give a stucco looking finish to the inner walls. Overall I am happy with how they turned out. Here are a couple of pictures of one of the ruins...there are more, but I only took pictures of this piece.

Armorcast Ruins

Well, I've gotten some flak recently about not doing anything for myself except purging stuff from my collection...so to prove my nay-sayers wrong, here's some terrain I've been working on in support of the Gathering in the Desert Lord of the Rings tournament which will be held in February. I'm going to provide the terrain for a 4x4 ruined city representing the beaten and battered city of Osgiliath. I'm using terrain pieces from Armorcast, Pegasus, and Crusader29. I would like to thank Tim K for cutting the bases the building ruins are on. So, here are some of the pieces:

Armorcast ruines and ruined walls

Armorcast ruined cathedral
Another view of the cathedral

Armorcast ruined building

Another set of Armorcast ruins